One Deck — Modular Console Chassis for PC-Based Lighting Control
One Deck bridges the gap between a full-size professional lighting console and a pile of controllers, USB cables, laptops, and accessories spread across a road case.
Built for PC-based lighting control systems, One Deck gives smaller control surfaces, MIDI controllers, touchscreens, keyboards, and computers a clean, unified home. Instead of assembling the same loose collection of gear at every show, One Deck turns it into a purpose-built control surface that looks, travels, and operates like a complete console.
Designed with DIY users and small production teams in mind, One Deck focuses on the things that matter most: power, versatility, speed, portability, and affordability. It gives you the workflow advantages of a dedicated console without forcing you into the cost, size, or fixed layout of one.
The work surface is intentionally a clean slate. Rather than deciding where every controller belongs for you, One Deck allows you to build around the way you program. Arrange your executor controls, faders, command keys, MIDI devices, touchscreens, or other hardware wherever they make the most sense for your workflow.
Whether you're building a compact touring rig, a portable programming station, or a complete PC-based lighting console, One Deck gives all of the pieces a single professional platform.
One chassis. Your hardware. Your workflow.
Clean all-in-one alternative to loose PC and MIDI control setups
Designed with an articulating monitor bar that folds down flat
Configurable work surface for custom DIY layouts
Compact enough for small production teams and portable rigs
Built to provide a console-style workflow without the cost of a full-size desk
Easy to expand or reconfigure as your control system evolves
What’s Included:
“Chassis Only”
Empty One Deck chassis
1× 8u rack panel
1x vented rack panel
2× 14” Touch-screen monitors, pre-mounted
2x USB-C cables (for monitors)
2x HDMI cables (for monitors)
2in wide velcro for top surface devices
“BYOPC”
One Deck Chassis fully outfitted and pre-wired
2× 14” Touch-screen monitors
5-port POE Switch
2x EtherCON RJ45 ports
2x DMX passthrough ports
4x USB-A ports - 2 front, 2 rear
Pre-wired PowerCon power input + cable
2x LED Lamps
Everything pre-wired with plugs terminating at the location where you drop in your own Mini-PC (You may have to add/swap a few cables based on which PC you choose and it’s display output ability)
**MINI-PC NOT INCLUDED - You can shop for and pick your own (check the minimum requirements for your software. Must include 1 network port, 2x USB-A Ports, 2 USB-C 4.0 ports rated for displays OR 2x USB-C ports plus 2x HDMI ports. )
“Full Build”
Everything from above all pre-wired and ready to rock. Just drop in your node and add your controllers and devices you want on the top of the Deck
Set up for USB or POE powered Nodes (if your node needs AC power, there will be an open slot to hardwire the AC power into. DO NOT ATTEMPT if you are not an electrician!!! Have someone certified help you. Feel free to reach out and we can include a pre-wired PowerCon, True1, or IEC cable inside for your node at no extra cost.)
GEEKOM PC Included - https://www.amazon.com/gp/product/B0G19ZF99R/ref=ox_sc_act_title_6?smid=AD6U1U60F2RPP&th=1
Dimensions: 25.50” Wide, 15,65” Depth, 5.5” Min Closed Height (controllers add thickness) 19.8” Max Open Height
Weight: TBA
Pre-Order Info and Timeline -
Pre-Order Window will Close October 31st 2026. Orders will be cutoff at this time to allow time to build before December. Orders WILL SHIP sooner than the cutoff date, in the order they are received, as soon as possible. The last orders in this run will ideally ship mid-November, December 1st at the latest. Your order may ship as early as 1-2 weeks from your order date, depending on manufacturing times. We are excited to launch the One Deck console, and appreciate your support and patience as we make and fill orders, while assuring good QC and services in the process. If you have any questions, please reach out to redshedofficial@gmail.com, OR the discord at the link below!
Ready to build your console? Here’s how
If you are purchasing a completely empty chassis, here are some resources to help you find parts, cables, and more to get started. I highly recommend joining the RSR discord where you will find a great community of other techs who DIY their own projects, and others who have built their own One Deck consoles. This is place to go for questions and build help. We unfortunately do not have the ability to provide a direct customer support line. I am, after all, just one guy.
Discord: https://discord.gg/uqRk8xJx6
Amazon Shopping List: https://www.amazon.com/shop/redshedrecords/list/3FFNQGNSJHBA6?ref_=aip_sf_list_spv_ons_mixed_d
One Deck — Modular Console Chassis for PC-Based Lighting Control
One Deck bridges the gap between a full-size professional lighting console and a pile of controllers, USB cables, laptops, and accessories spread across a road case.
Built for PC-based lighting control systems, One Deck gives smaller control surfaces, MIDI controllers, touchscreens, keyboards, and computers a clean, unified home. Instead of assembling the same loose collection of gear at every show, One Deck turns it into a purpose-built control surface that looks, travels, and operates like a complete console.
Designed with DIY users and small production teams in mind, One Deck focuses on the things that matter most: power, versatility, speed, portability, and affordability. It gives you the workflow advantages of a dedicated console without forcing you into the cost, size, or fixed layout of one.
The work surface is intentionally a clean slate. Rather than deciding where every controller belongs for you, One Deck allows you to build around the way you program. Arrange your executor controls, faders, command keys, MIDI devices, touchscreens, or other hardware wherever they make the most sense for your workflow.
Whether you're building a compact touring rig, a portable programming station, or a complete PC-based lighting console, One Deck gives all of the pieces a single professional platform.
One chassis. Your hardware. Your workflow.
Clean all-in-one alternative to loose PC and MIDI control setups
Designed with an articulating monitor bar that folds down flat
Configurable work surface for custom DIY layouts
Compact enough for small production teams and portable rigs
Built to provide a console-style workflow without the cost of a full-size desk
Easy to expand or reconfigure as your control system evolves
What’s Included:
“Chassis Only”
Empty One Deck chassis
1× 8u rack panel
1x vented rack panel
2× 14” Touch-screen monitors, pre-mounted
2x USB-C cables (for monitors)
2x HDMI cables (for monitors)
2in wide velcro for top surface devices
“BYOPC”
One Deck Chassis fully outfitted and pre-wired
2× 14” Touch-screen monitors
5-port POE Switch
2x EtherCON RJ45 ports
2x DMX passthrough ports
4x USB-A ports - 2 front, 2 rear
Pre-wired PowerCon power input + cable
2x LED Lamps
Everything pre-wired with plugs terminating at the location where you drop in your own Mini-PC (You may have to add/swap a few cables based on which PC you choose and it’s display output ability)
**MINI-PC NOT INCLUDED - You can shop for and pick your own (check the minimum requirements for your software. Must include 1 network port, 2x USB-A Ports, 2 USB-C 4.0 ports rated for displays OR 2x USB-C ports plus 2x HDMI ports. )
“Full Build”
Everything from above all pre-wired and ready to rock. Just drop in your node and add your controllers and devices you want on the top of the Deck
Set up for USB or POE powered Nodes (if your node needs AC power, there will be an open slot to hardwire the AC power into. DO NOT ATTEMPT if you are not an electrician!!! Have someone certified help you. Feel free to reach out and we can include a pre-wired PowerCon, True1, or IEC cable inside for your node at no extra cost.)
GEEKOM PC Included - https://www.amazon.com/gp/product/B0G19ZF99R/ref=ox_sc_act_title_6?smid=AD6U1U60F2RPP&th=1
Dimensions: 25.50” Wide, 15,65” Depth, 5.5” Min Closed Height (controllers add thickness) 19.8” Max Open Height
Weight: TBA
Pre-Order Info and Timeline -
Pre-Order Window will Close October 31st 2026. Orders will be cutoff at this time to allow time to build before December. Orders WILL SHIP sooner than the cutoff date, in the order they are received, as soon as possible. The last orders in this run will ideally ship mid-November, December 1st at the latest. Your order may ship as early as 1-2 weeks from your order date, depending on manufacturing times. We are excited to launch the One Deck console, and appreciate your support and patience as we make and fill orders, while assuring good QC and services in the process. If you have any questions, please reach out to redshedofficial@gmail.com, OR the discord at the link below!
Ready to build your console? Here’s how
If you are purchasing a completely empty chassis, here are some resources to help you find parts, cables, and more to get started. I highly recommend joining the RSR discord where you will find a great community of other techs who DIY their own projects, and others who have built their own One Deck consoles. This is place to go for questions and build help. We unfortunately do not have the ability to provide a direct customer support line. I am, after all, just one guy.
Discord: https://discord.gg/uqRk8xJx6
Amazon Shopping List: https://www.amazon.com/shop/redshedrecords/list/3FFNQGNSJHBA6?ref_=aip_sf_list_spv_ons_mixed_d
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16